INCH-POUND MS27505G w/AMENDMENT 1 8 February 2008 SUPERSEDING MS27505G 12 July 2002 DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, BACK PANEL, BOX MOUNTING FLANGE, CRIMP TYPE, BAYONET COUPLING, SERIES I This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-38999. CHAMFERED DR ROUNDED --+-------+---~4 PLACES K__li:._* L * 1 UU -----i-F- -::I 1--,06 ~~~~~.-----+,,.77 I ITT MAX GROMMET EXTENSION X DIA ~?llllllll2~______J,u M ~ P DIA L 120~BSC (TYP) 4 HOLES SEE NOTE 4 4 GG @ .005 DIA @ FDR DETAILS OF CONNECTOR FRONT END C NFIGURA TI N) SEE PROCUREMENT SPECIFICA TI NS STYLE P FIGURE 1. Receptacle, class E. AMSC N/A FSC 5935 MS27505G w/Amendment 1 I-- MARKING SURFACE LOCATION OPTIONAL F SEE NOTE 5 e STYLES FIGURE 1. Receptacle, class E - Continued. 2 MS27505G w/Amendment 1 Shell size K L M P R S UU X F +.015 max +.000 dia BSC .020 max max max -.005 +.010 -.000 dia -.005 9 .3595 .938 .547 11 .406 1.031 .656 .453 1.125 .4845 1.219 .953 17 .531 1.312 1.078 19 .578 1.438 1.203 21 .625 1.562 1.328 .6875 1.688 .750 1.812 13 .085 .219 .820 15 23 .128 .115 .250 .790 .147 25 Inches mm Inches .005 0.13 .147 .007 0.18 .010 mm .156 .188 .828 .234 .204 1.453 1.578 .193 Inches mm Inches mm Inches mm 3.73 .406 10.31 .750 19.05 1.219 30.96 .156 3.96 .453 11.51 .790 20.07 1.312 33.32 0.25 .193 4.90 .4845 12.31 .820 20.83 1.328 33.73 .015 0.38 .204 5.18 .531 13.49 .828 21.03 1.438 36.53 .020 0.51 .207 5.26 .547 13.89 .938 23.83 1.453 36.91 .031 0.79 .219 5.56 .560 14.22 .953 24.21 1.562 39.67 .06 1.5 .234 5.94 .578 14.68 1.031 26.19 1.578 40.08 .085 2.16 .250 6.35 .625 15.88 1.078 26.38 1.688 42.88 .115 2.92 .328 8.33 .656 16.66 1.125 27.58 1.812 46.02 .128 3.25 .3595 9.13 .6875 17.46 1.203 30.56 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. For main keyway and keyway positions, see MIL-DTL-38999. 4. The gauge features for GG shall be .010 (0.25 mm) smaller than the MMC size at basic location. 5. Maximum panel thickness including mounting hardware. FIGURE 1. Receptacle, classes E - Continued. 3 MS27505G w/Amendment 1 REQUIREMENTS: Dimensions and configuration: See figure 1. Interface dimensions shall conform to MIL-DTL-38999. Mating connectors: MS27467, MS27653, SAE-AS85049/45, and SAE-AS85049/46. Insert arrangements: See MIL-STD-1560. Part or Identifying Number (PIN) example: MS27505 E 15 B 18 P A MS number Class Shell size Finish Insert arrangement Contact style Polarizing positions no letter is required for normal. Amendment notations. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Referenced documents. In addition to MIL-DTL-38999, this document references the following: MS27467 MS27653 MIL-STD-1560 SAE-AS85049/45 SAE-AS85049/46 4 MS27505G w/Amendment 1 CONCLUDING MATERIAL Custodians: Army - CR Navy - AS Air Force - 11 DLA - CC Preparing activity: DLA - CC (Project 5935-2007-164) Review activities: Army - AR, MI Navy - EC, MC, OS Air Force - 19, 99 DLA - IS NOTE: The activities listed above were interested in this document as of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil. 5