1996 Nov 05 1
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Radial Long Life RLL 116
FEATURES
•Polarized aluminium electrolytic
capacitors, non-solid
•Radial leads, cylindrical aluminium
case, all-insulated (light blue)
•Natural pitch 2.5 mm and 5 mm
•Charge and discharge proof
•Miniaturized, high CV-product per
unit volume
•Long useful life: 2000 hours at
105 °C, high reliability.
APPLICATIONS
•Automotive, telecommunication,
industrial and EDP
•Stand-by applications in audio and
video equipment
•Coupling, decoupling, timing;
smoothing, filtering and buffering in
DC-DC converters
•Portable and mobile equipment
(small size, low mass).
Fig.1 Component outlines.
handbook, 4 columns
MAM074
handbook, halfpage
RLL 116
105 oC
MGC673
RSP 036 85 oC
RML 048
higher
CV-values
QUICK REFERENCE DATA
DESCRIPTION VALUE
Case sizes (∅Dnom ×Lnom)5×11 and 8.2 ×11 mm
Rated capacitance range, CR0.47 to 470 µF
Tolerance on CR±20%
Rated voltage range, UR6.3 to 100 V
Category temperature range −55 to +105 °C
Endurance test at 105 °C 1500 hours
Endurance test at 85 °C 5000 hours
Useful life at 105 °C 2000 hours
Useful life at 40 °C, 1.3 ×IR applied 200000 hours
Shelf life at 0 V, 105 °C 1500 hours
Based on sectional specification IEC 384-4/CECC 30300
Climatic category IEC 68 (DIN 40040) 55/105/56 (FMF)
1996 Nov 05 2
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Radial Long Life RLL 116
Selection chart for CR, UR, and relevant nominal case sizes (∅D×L in mm)
Preferred types in bold.
Note
1. For higher CV-values see
“data sheet RML 048”
.
CR
(µF) UR (V)
6.3 10 16 25 35 40 50 63 100
0.47 −−−−−−5×11 −−
1.0 −−−−−−5×11 −−
1.5 −−−−−−5×11 −−
2.2 −−−−−−5×11 −8.2 ×11
3.3 −−−−−−5×11 −−
4.7 −−−−−−5×11 −8.2 ×11
6.8 −−−−−−5×11 −−
10 −−−−−−5×11 8.2 ×11 8.2 ×11
−−−−−−8.2 ×11 −−
15 −−−−−−5×11 −−
22 −−−−−−5×11 8.2 ×11 −
−−−−−−8.2 ×11 −−
33 −−−−5×11 5 ×11 8.2 ×11 −−
47 −−−5×11 −−8.2 ×11 −−
68 −−5×11 −−−8.2 ×11 −−
100 −5×11 −−8.2 ×11 8.2 ×11 −−−
150 5 ×11 −−8.2 ×11 −−−−−
220 −−8.2 ×11 −−−−−−
330 −8.2 ×11 −−−−−−−
470(1) 8.2 ×11 −−−−−−−−
1996 Nov 05 3
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Radial Long Life RLL 116
MECHANICAL DATA, AVAILABLE FORMS AND PACKAGING QUANTITIES
Fig.2 Form CA: Long leads.
handbook, 2 columns
MBC317
L
O D
F15 min
5 min
dO
Dimensions in mm.
For dimensions see Table 1.
Fig.3 Form CB: Cut leads.
handbook, 2 columns
L
MGB133 - 1
4
F
1
0Od
OD
Dimensions in mm.
For dimensions see Table 1.
Table 1 Physical dimensions, mass and packaging quantities; see Figs 2 and 3
NOMINAL
CASE SIZE
∅D×L
(mm)
CASE
CODE ∅d
(mm) ∅Dmax
(mm) Lmax
(mm) F
(mm) MASS
(g)
PACKAGING QUANTITIES
FORM
CA, CB FORM
TR+,TN+ FORM
TFA, TNA
5×11 11 0.5 5.5 12 2.5 ±0.5 ≈0.4 1000 1000 2000
8.2 ×11 13 0.6 8.7 12 5 ±0.5 ≈1.1 1000 500 1000
1996 Nov 05 4
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Radial Long Life RLL 116
Taped products
Fig.4 Taped in box (ammopack).
Form TFA.
Pitch F = 5 mm.
Case ∅D×L=5×11 and 8.2 ×11 mm.
Tape dimensions are specified in this handbook, Section
“Packaging”
.
a
ndbook, 4 columns
MRA448
Fig.5 Taped in box (ammopack).
Form TNA.
Pitch F = 2.5 mm.
Case ∅D×L=5×11 mm only.
Tape dimensions are specified in this
handbook, Section
“Packaging”
.
handbook, 2 columns
MRA449
MARKING
The capacitors are marked (where possible) with the following information:
•Rated capacitance (in µF)
•Tolerance on rated capacitance, code letter in accordance with
“IEC 62”
•Rated voltage (in V)
•Group number (116)
•Name of manufacturer (PH)
•Date code in accordance with
“IEC 62”
•Code indicating factory of origin
•Minus-sign on top to identify the negative terminal.
1996 Nov 05 5
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Radial Long Life RLL 116
ELECTRICAL DATA
Unless otherwise specified, all electrical values in Tables 2 and 4 apply at Tamb =20°C,
P = 86 to 106 kPa, RH = 45 to 75%.
Table 2 Electrical data; preferred types in bold
SYMBOL DESCRIPTION
CRrated capacitance at 100 Hz, tolerance ±20%
IRrated RMS ripple current at 100 kHz, 105 °C
IL1 max. leakage current after 1 minute at UR
IL5 max. leakage current after 5 minutes at UR
Tan δmax. dissipation factor at 100 Hz
ESR equivalent series resistance at 100 Hz (calculated from tan δmax and CR)
Z10 max. impedance at 10 kHz and 20 or −40 °C
Z100 max. impedance at 100 kHz and 20 °C
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
∅D×L
(mm)
CASE
CODE
IR
100 kHz
105 °C
(mA)
IL1
1 min
(µA)
IL5
5 min
(µA)
Tan δ
100 Hz
ESR
100 Hz
(Ω)
Z10
10 kHz
20 °C
(Ω)
Z100
100 kHz
20 °C
(Ω)
Z10
10 kHz
−40 °C
(Ω)
6.3 150 5 ×11 11 130 8.7 3.9 0.25 2.7 2 1.3 32
470 8.2 ×11 13 300 21 6 0.25 0.8 0.64 0.45 10
10 100 5 ×11 11 130 9 4 0.2 3.2 2 1.4 32
330 8.2 ×11 13 280 23 6.3 0.2 1.0 0.61 0.45 9.7
16 68 5 ×11 11 130 9.5 4.1 0.16 3.7 2.4 1.5 29
220 8.2 ×11 13 280 24 6.5 0.16 1.2 0.73 0.5 9.1
25 47 5 ×11 11 120 10 4.2 0.14 4.7 2.6 1.6 32
150 8.2 ×11 13 260 26 6.8 0.14 1.5 0.8 0.5 10
35 33 5 ×11 11 110 9.9 4.2 0.12 5.8 2.7 1.7 33
100 8.2 ×11 13 240 24 6.5 0.12 1.9 0.9 0.55 11
40 33 5 ×11 11 110 10.9 4.3 0.12 5.8 2.7 1.7 33
100 8.2 ×11 13 240 27 7 0.12 1.9 0.9 0.55 11
1996 Nov 05 6
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Radial Long Life RLL 116
ORDERING INFORMATION
Ordering example
Electrolytic capacitor RLL 116
220 µF/16 V; ±20%
Nominal case size: ∅8.2 ×11 mm; Form TFA
Catalogue number: 2222 116 35221.
Table 3 Ordering information; preferred types in bold
UR
(V)
CR
100 Hz
(µF)
CASE
CODE
CATALOGUE NUMBER 2222 ... .....
BULK PACKAGING TAPED AMMOPACK
LONG LEADS CUT LEADS
FORM
CA F
(mm) FORM
CB F
(mm) FORM
TFA F
(mm) FORM
TNA F
(mm)
6.3 150 11 116 53151 2.5 −−116 33151 5.0 116 73151 2.5
470 13 116 53471 5.0 116 63471 5.0 116 33471 5.0 −−
10 100 11 116 54101 2.5 −−116 34101 5.0 116 74101 2.5
330 13 116 54331 5.0 116 64331 5.0 116 34331 5.0 −−
16 68 11 116 55689 2.5 −−116 35689 5.0 116 75689 2.5
220 13 116 55221 5.0 116 65221 5.0 116 35221 5.0 −−
25 47 11 116 56479 2.5 −−116 36479 5.0 116 76479 2.5
150 13 116 56151 5.0 116 66151 5.0 116 36151 5.0 −−
35 33 11 116 50339 2.5 −−116 30339 5.0 116 70339 2.5
100 13 116 50101 5.0 116 60101 5.0 116 30101 5.0 −−
40 33 11 116 57339 2.5 −−116 37339 5.0 116 77339 2.5
100 13 116 57101 5.0 116 67101 5.0 116 37101 5.0 −−
1996 Nov 05 7
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Radial Long Life RLL 116
ELECTRICAL DATA (continued)
Table 4 Electrical data continued; preferred types in bold
Additional electrical data
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
∅D×L
(mm)
CASE
CODE
IR
100 kHz
105 °C
(mA)
IL1
1 min
(µA)
IL5
5 min
(µA)
Tan δ
100 Hz
ESR
100 Hz
(Ω)
Z10
10 kHz
20 °C
(Ω)
Z100
100 kHz
20 °C
(Ω)
Z10
10 kHz
−40 °C
(Ω)
50 0.47 5 ×11 11 30 3.1 3 0.09 300 150 10 1900
1.0 5 ×11 11 40 3.3 3.1 0.09 140 70 6 900
1.5 5 ×11 11 50 3.5 3.1 0.09 95 47 4 600
2.2 5 ×11 11 60 3.7 3.1 0.09 65 32 3.5 410
3.3 5 ×11 11 65 4 3.2 0.09 43 21 3.1 270
4.7 5 ×11 11 70 4.4 3.2 0.09 30 15 2.8 190
6.8 5 ×11 11 75 5 3.3 0.09 21 10 2.5 130
10 5 ×11 11 80 6 3.5 0.09 14 7 2.2 90
10 8.2 ×11 13 160 6 3.5 0.05 8.0 3.6 1.0 40
15 5 ×11 11 90 7.5 3.8 0.09 9.5 4.7 2.0 60
22 5 ×11 11 110 9.6 4.1 0.09 6.5 3.2 1.9 41
22 8.2 ×11 13 190 9.6 4.1 0.06 4.4 2.2 0.9 29
33 8.2 ×11 13 190 13 4.7 0.09 4.3 2.1 0.77 27
47 8.2 ×11 13 210 17 5.4 0.09 3.0 1.5 0.65 19
68 8.2 ×11 13 240 23 6.4 0.09 2.1 1.0 0.55 13
63 10 8.2 ×11 13 160 7 3.6 0.06 9.5 3.5 1.3 45
22 8.2 ×11 13 190 11 4.4 0.06 4.4 1.8 0.9 23
100 2.2 8.2 ×11 13 60 4.3 3.2 0.06 43 18 4 190
4.7 8.2 ×11 13 75 5.8 3.5 0.07 24 12 3.5 170
10 8.2 ×11 13 100 9 4 0.08 13 4.5 3 70
PARAMETER CONDITIONS VALUE
Voltage
Surge voltage for short periods Us≤1.3 UR
Reverse voltage Urev ≤1V
Current
Leakage current after 1 minute at URIL1 ≤0.006CR×UR+3µA
after 5 minutes at URIL5 ≤0.001CR×UR+3µA
Inductance
Equivalent series inductance (ESL) case ∅D×L=5×11 mm typ. 13 nH
case ∅D×L = 8.2 ×11 mm typ. 16 nH
1996 Nov 05 8
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Radial Long Life RLL 116
ORDERING INFORMATION (continued)
Table 5 Ordering information continued; preferred types in bold
UR
(V)
CR
100 Hz
(µF)
CASE
CODE
CATALOGUE NUMBER 2222 ... .....
BULK PACKAGING TAPED AMMOPACK
LONG LEADS CUT LEADS
FORM
CA F
(mm) FORM
CB F
(mm) FORM
TFA F
(mm) FORM
TNA F
(mm)
50 0.47 11 116 51477 2.5 −5.0 116 31477 5.0 116 71477 2.5
1.0 11 116 51108 2.5 −5.0 116 31108 5.0 116 71108 2.5
1.5 11 116 51158 2.5 −5.0 116 31158 5.0 116 71158 2.5
2.2 11 116 51228 2.5 −5.0 116 31228 5.0 116 71228 2.5
3.3 11 116 51338 2.5 −5.0 116 31338 5.0 116 71338 2.5
4.7 11 116 51478 2.5 −5.0 116 31478 5.0 116 71478 2.5
6.8 11 116 51688 2.5 −5.0 116 31688 5.0 116 71688 2.5
10 11 116 51109 2.5 −5.0 116 31109 5.0 116 71109 2.5
10 13 116 90084 5.0 116 90085 5.0 116 90036 5.0 −−
15 11 116 51159 2.5 −5.0 116 31159 5.0 116 71159 2.5
22 11 116 51229 2.5 −5.0 116 31229 5.0 116 71229 2.5
22 13 116 90025 5.0 116 90086 5.0 116 90039 5.0 −−
33 13 116 51339 5.0 116 61339 5.0 116 31339 5.0 −−
47 13 116 51479 5.0 116 61479 5.0 116 31479 5.0 −−
68 13 116 51689 5.0 116 61689 5.0 116 31689 5.0 −−
63 10 13 116 58109 5.0 116 68109 5.0 116 38109 5.0 −−
22 13 116 58229 5.0 116 68229 5.0 116 38229 5.0 −−
100 2.2 13 116 59228 5.0 116 69228 5.0 116 39228 5.0 −−
4.7 13 116 59478 5.0 116 69478 5.0 116 39478 5.0 −−
10 13 116 59109 5.0 116 69109 5.0 116 39109 5.0 −−
1996 Nov 05 9
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Radial Long Life RLL 116
ELECTRICAL DATA (continued)
Capacitance (C)
Fig.6 Typical multiplier of capacitance as a function of ambient temperature.
Curve 1: 6.3 V.
Curve 2: 10 V; 16 V.
Curve 3: 35 V; 40 V; 63 V; 100 V.
Curve 4: 50 V.
C0= capacitance at 20 °C, 100 Hz.
handbook, 4 columns
020
MGB144
60 40 40 60 80
Tamb ( C)
o
0.6
0.7
0.8
0.9
1.0
1.1
10020 120
C
0
C
1
2
3
4
123
4
Fig.7 Typical multiplier of capacitance as a function of frequency.
Curve 1: 50 V (≤2.2 µF).
Curve 2: 50 V (>2.2 µF).
Curve 3: 50 V (≥15 µF).
Curve 4: 35 V; 40 V; 63 V; 100 V.
Curve 5: 25 V.
Curve 6: 16 V.
Curve 7: 6.3 V; 10 V.
C0= capacitance at 20 °C, 100 Hz.
handbook, 4 columns
105
MGB145
104
103
102
10 f (Hz)
0.7
0.8
0.9
1.0
C
0
C2
1
3
4
6
5
7
7
1
1996 Nov 05 10
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Radial Long Life RLL 116
Equivalent series resistance (ESR)
Fig.8 Typical multiplier of ESR as a function of ambient temperature.
Curve 1: 50 V (≥10 µF).
Curve 2: 6.3 V; 63 V; 100 V.
ESR0= typical at 20 °C, 100 Hz.
handbook, 4 columns
MGB146
0 50 100
10
1
10
50 Tamb ( C)
o
ESR0
ESR
1
102
2
1
2
1
Fig.9 Typical multiplier of ESR as a function of frequency.
Curve 1: 6.3 V.
Curve 2: 50 V (≥10 µF); 63 V; 100 V.
ESR0= typical at 20 °C, 100 Hz.
handbook, 4 columns
0105
MGB126
104
103
102
10 f (Hz)
0.4
0.8
1.2
1.6
2.0
2
1
ESR0
ESR
1
2
1996 Nov 05 11
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Radial Long Life RLL 116
Impedance (Z)
Fig.10 Typical impedance as a function of frequency.
Curve 1: 0.47 µF.
Curve 2: 1.0 µF.
Curve 3: 1.5 µF.
Curve 4: 2.2 µF.
Curve 5: 3.3 µF.
Curve 6: 4.7 µF.
Curve 7: 6.8 µ.F
Curve 8: 10 µF.
Curve 9: 15 µF.
Curve 10: 22 µF.
Curve 11: 33 µF.
Curve 12: 47 µF.
Curve 13: 68 µF.
Curve 14: 100 µF.
Curve 15: 150 µF.
Case ∅D×L=5×11 mm.
Tamb =20°C.
handbook, 4 columns
106
MGB166 - 1
105
104
103
102f (Hz)
103
10
1
102
Z
( )Ω
1
2
3
5
4
6
7
9
8
10
11
12
13
15
14
Fig.11 Typical impedance as a function of frequency.
Curve 1: 2.2 µF.
Curve 2: 4.7 µF.
Curve 3: 10 µF, 100 V.
Curve 4: 10 µF, 50 V.
Curve 5: 22 µF, 50 V.
Curve 6: 33 µF.
Curve 7: 47 µF.
Curve 8: 68 µF.
Curve 9: 100 µF.
Curve 10: 150 µF.
Curve 11: 220 µF.
Curve 12: 330 µF.
Curve 13: 470 µF.
Case ∅D×L = 8.2 ×11 mm.
Tamb =20°C.
handbook, 4 columns
MBC182
6543 10101010
103
102
10
1
10 1f (Hz)
Z
( )Ω
2
10
2
1
3
4
6
5
7
8
10
9
11
12
13
1996 Nov 05 12
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Radial Long Life RLL 116
RIPPLE CURRENT AND USEFUL LIFE
Table 6 Multiplier of ripple current (IR/IRO) as a function of frequency; IRO = ripple current at 100 kHz
FREQUENCY
(Hz) IR MULTIPLIER
UR= 6.3 to 10 V UR=16to35V U
R= 40 to 100 V (CR≥10 µF)
50 0.7 0.6 0.5
100 0.77 0.71 0.63
300 0.86 0.85 0.78
1000 0.92 0.93 0.88
3000 0.96 0.96 0.94
10 to 100 k 1.0 1.0 1.0
handbook, full pagewidth
3.8
3.7
3.6
3.5
3.4
3.3
3.2
3.0
2.8
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.5
0.0
3.1
40 50 60 70 80 90 100 110
MEA240
lifetime multiplier
Tamb (C)
o
I
A
R
I
1)
200
100
60
30
150
20
6.0
4.0
2.0
1.5
12
8.0
3.0
1.0
Fig.12 Multiplier of useful life as a function of ambient temperature and ripple current load.
IA= actual ripple current at 100 kHz.
IR= rated ripple current at 100 kHz, 105 °C.
(1) Useful life at 105 °C and IR applied: 2000 hours.
1996 Nov 05 13
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Radial Long Life RLL 116
SPECIFIC TESTS AND REQUIREMENTS
General tests and requirements are specified in this handbook, Section
“Tests and Requirements”
.
Table 7 Test procedures and requirements
TEST PROCEDURE
(quick reference) REQUIREMENTS
NAME OF TEST REFERENCE
Endurance IEC 384-4/
CECC 30300
subclause 4.13
Tamb = 105 °C; UR applied;
1500 hours UR≤6.3 V; ∆C/C: +15/−30%
UR>6.3 V; ∆C/C: ±15%
tan δ≤1.3 ×spec. limit
Z10 ≤2×spec. limit
IL5 ≤spec. limit
Useful life CECC 30301
subclause 1.8.1 Tamb = 105 °C; UR and IR applied;
2000 hours UR≤6.3 V; ∆C/C: +45/−50%
UR>6.3 V; ∆C/C: ±45%
tan δ≤ 3 ×spec. limit
Z10 ≤3×spec. limit
IL5 ≤spec. limit
no short or open circuit
total failure percentage: ≤1%
Shelf life
(storage at
high temperature)
IEC 384-4/
CECC 30300
subclause 4.17
Tamb = 105 °C; no voltage applied;
1500 hours;
after test: UR to be applied for 30 minutes,
24 to 48 hours before measurement
∆C/C, tan δ, Z: for requirements
see ‘Endurance test’ above
IL5 ≤2×spec. limit
