225
LARGE ALUMINUM ELECTROLYTIC CAPACITORS
LARGE TYPES
·For high grade audio equipment
·High resonance frequency, low ESR and low impedance
·Ideally suited for Hi-Fi VTR and CD players
·Snap-in terminal type
·Voltage range of 16~100V
·Complied to the RoHS directive
For Hi-Fi Component System
Series
AM
Item Characteristics
Operating temperature range
Capacitance tolerance
Leakage current max.
Dissipation factor max.
(at 120Hz, 20°C)
Charge and discharge
characteristics
Load life
(after application of the rated
voltage for 2000 hours at 85°C)
Shelf life (at 85°C)
Leakage current
Capacitance change
tanδ
Less than specified value
Within ±20% of initial value
Less than 200% of specified value
Appearance
Leakage current
Capacitance change
tanδ
No visible damage and no leakage electrolyte
Less than specified value
Within ±15% of initial value
Less than 150% of specified value
WV
tanδ
16
0.25
25 ~ 35
0.22
50 ~ 71
0.20
80 ~ 100
0.15
-40 ~ +85°C
±20% at 120Hz, 20°C
I = 3 CV (μA) (after 5 minutes)
After charge and discharge for 5000 cycles at 70°C with application of the rated voltage,
the capacitors shall be satisfied the following specifications.
Conditions
Charge resistance : 4ΩApplied current : 1A
Discharge resistance : 100ΩCharge and discharge time : 60sec. (each)
For Audio Use
PC Board
Mounting Holes
●Terminal
10
Safety vent
Insulating sleeve
●Terminal
2-Ø2±0.1
ØD+1 max.
L+2 max.
0.8±0.1
1.5±0.1
0.8±0.1
6.0±1
10±0.2
6.0±1
+
-
●DRAWING Unit : mm
Solvent Proof
After 1000 hours no load test, leakage current, capacitance and tanδare same as load life value.
The measurement shall be performed at 20°C by the KS C 6035 clause 5.4.
2013-5장 2012.11.22 6:46 PM 페이지225 G4-1.25G(Mac 1) JETPDF 2400DPI 175LPI T